Download  Print this page

Swingarm; Swingarm Removal; Swingarm Installation - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Swingarm

Swingarm Removal

Raise the rear wheel off the ground with the jack.
Special Tool - Jack: 57001-1238
Remove:
Drive Chain (see Drive Chain Removal in the Final Drive
chapter)
Rear Wheel (see Rear Wheel Removal in the
Wheels/Tires chapter)
Remove:
Drive Chain Cover Bolts [A]
Drive Chain Cover [B]
Drive Chain Guide Bolts [C]
Drive Chain Guide [D]
Remove:
Rear Shock Absorber Lower End [A] (see Rear Shock
Absorber Removal)
Swingarm Pivot Shaft Nut [B]
Pull out the Swingarm pivot shaft [C] and remove the
swingarm [D] backward.
Remove the chain slipper [E] from the swingarm.

Swingarm Installation

Installation is the reverse of removal.
Replace the rear shock absorber mounting nut [A] and
swingarm pivot shaft nut [B] with new ones.
Tighten the pivot shaft nut after installing the rear shock
absorber.
Torque - Rear Shock Absorber Mounting Nut: 39 N·m (4.0
kgf·m, 29 ft·lb)
Swingarm Pivot Shaft Nut: 78 N·m (8.0 kgf·m, 58
ft·lb)
SUSPENSION 12-15

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: