Brake Pedal and Rod
Brake Pedal Free Play Inspection
Refer to Brake Pedal Free Play Inspection in the Periodic
Brake Pedal Free Play Adjustment
Refer to Brake Pedal Free Play Adjustment in the Periodic
Brake Pedal and Rod Removal
Remove the brake rod [A] end from the brake cam lever
[B] (see Rear Wheel Removal in the Wheels/Tires chap-
Brake Pedal Return Spring [A]
Brake Pedal Mounting Bolt [B]
Brake Pedal [C] with Rod [D]
Cotter Pin [A]
Brake Rod [C]
Brake Pedal and Rod Installation
Installation is the reverse of removal.
Replace the cotter pin and O-rings with new ones.
Apply multi purpose grease to the pedal pivot and O-rings.
Before installing the brake pedal, set in the return spring
each end to the brake pedal.
Install the return spring [A] so that its long hook portion
[B] faces downward.
Torque - Brake Pedal Mounting Bolt: 8.8 N·m (0.90 kgf·m,
Adjust the brake pedal free play (see Brake Pedal Free
Play Adjustment in the Periodic Maintenance chapter).