Download  Print this page

Axle Inspection - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
9-10 WHEELS/TIRES
Wheels (Rims)

Axle Inspection

Visually inspect the front and rear axle for damages.
If the axle is damaged or bent, replace it.
Place the front axle in V blocks that are 100 mm (3.94
in.) (Rear Axle: 110 mm (4.33 in.)) [A] apart, and set
a dial gauge [B] on the axle at a point halfway between
the blocks. Turn [C] the axle to measure the runout. The
difference between the highest and lowest dial readings
is the amount of runout.
If the runout exceeds the service limit, replace the axle.
Front Axle Runout: 100 mm (3.94 in.)
Standard:
Service Limit:
Rear Axle Runout: 110 mm (3.94 in.)
Standard:
Service Limit:
0.1 mm (0.004 in.) or less
0.2 mm (0.008 in.)
0.1 mm (0.004 in.) or less
0.2 mm (0.008 in.)

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: