Download  Print this page

Oil Pipe; Oil Pipe Removal; Oil Pipe Installation - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

6-10 ENGINE LUBRICATION SYSTEM

Oil Pipe

Oil Pipe Removal

Drain the engine oil (see Engine Oil Change in the Peri-
odic Maintenance chapter).
Remove:
Banjo Bolts [A]
Oil Pipe Clamp Screw [B]
Oil Pipe [C]

Oil Pipe Installation

Before installation, flush out the pipe with a high flash
-point solvent.
Discard the used copper washers and install new washers
[A] on each side of the pipe fittings.
Lightly tighten the banjo bolts and oil pipe clamp screw to
a snug fit, and tighten them to the specified torque.
Torque - Oil Pipe Banjo Bolts [B]: 15 N·m (1.5 kgf·m, 11 ft·lb)
Oil Pipe Clamp Screw [C]: 5.2 N·m (0.53 kgf·m, 46
in·lb)

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: