Download  Print this page

Clutch Housing Finger Damage Inspection; Clutch Hub Spline Damage Inspection; Clutch Adjustment (klx110c) - Kawasaki KLX110 Service Manual

Hide thumbs


Table of Contents

Clutch Housing Finger Damage Inspection

Visually inspect the clutch housing fingers [A] where the
friction plate tangs [B] hit them.
If they are badly worn or if there are groove cuts where the
tangs hit, replace the housing. Also, replace the friction
plates if their tangs are damaged.

Clutch Hub Spline Damage Inspection

Visually inspect where the teeth on the steel plates wear
against the clutch hub splines.
If there are notches worn into the clutch hub splines [A],
replace the clutch hub. Also, replace the steel plates if
their teeth are damaged.

Clutch Adjustment (KLX110C)

Refer to the Clutch Release Adjustment in the Periodic
Maintenance chapter.


Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: