Download  Print this page

Rocker Arm & Arm Shaft Wear Inspection - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Rocker Arm, Rocker Arm Shaft
Rocker Arm & Arm Shaft Wear Inspection
Visually inspect the area on the rocker arm where the cam
rubs.
If there is any damage or uneven wear, replace the rocker
arm.
Measure the inside diameter [A] of each rocker arm with
a cylinder gauge.
Rocker Arm Inside Diameter
10.000 ∼ 10.015 mm (0.3937 ∼ 0.3943 in.)
Standard:
Service Limit: 10.05 mm (0.396 in.)
If it exceeds the service limit, replace the rocker arm.
Measure the diameter [B] of each rocker arm shaft where
the rocker arm fits.
Rocker Arm Shaft Diameter
9.980 ∼ 9.995 mm (0.3929 ∼ 0.3935 in.)
Standard:
Service Limit: 9.95 mm (0.392 in.)
If the diameter is less than the service limit, replace the
rocker arm shaft.
ENGINE TOP END 4-19

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: