Table of Contents
Advertisement
Turn Your Set Top Box or TV On or Off
The device selection buttons tell your remote whether you want to control
your set top box or your television.
To turn your TV on or off, press the
button.
To turn your set top box on or off, press the
Power
Power button on your remote control.
Power
button on your remote control.
Note: It is not necessary to turn your set top box off.
Note: Your remote control must have the remote code programmed
in before it can send the correct signals for your TV. If the list of
TV brand codes was not included in your installation pack, please
contact customer service.
If pressing
Power
Power
Power turned the wrong device on or off, press the
button again, press the appropriate device selection button (AUX, DVD,
or STB) and press
Change Channels
The
CH+/-
button will change channels up or down one at a time.
The
Number Pad
GUIDE
will display Guide so you can find a program you like. If the
program is on now, you tune to the channel showing it. If not, you can set
a scheduled event to remind you when it does come on. If your set top box
supports recording, you can schedule a recording for the program.
For more information on Guide, see section
For more information on setting reminders, autotunes and recordings, see
Setting Reminders, Autotunes and Recordings
Adjust Volume
The
VOL+/-
button will adjust the volume gradually.
The
MUTE
button will toggle the sound on and off.
TV button and then press the
TV
TV
turned the wrong device on or off, press the
Power
Power once more.
Power
once more.
can be used to directly enter a channel number.
1 Remote Control Basics
button and then press the
button and then the
STB
5
Guide.
in section
3
POWER
Power
TV
5
Guide.
Advertisement
Table of Contents
