11. ASSEMBLY HINTS
1) Tighten the screws to the torque of 17 Ncm in
the order shown.
3) Tighten the screws to the torque of 12 Ncm.
The order of 7 and 8 can be chosen freely.
11.1 Assembling the Alpha Keymat
1. Start with the hooks on upper side.
2. Then, press the right and left side snaps carefully (by sliding a little) in place one by one.
3. Press the lower right side snap in place (by sliding a little) and be careful not to damage the snap.
4. Continue with the left side snap by pressing keyboard so that you can hear a snapping sound.
5. Press the keymat with fingers for a few seconds (minimum of 3 seconds) to activate the glue.
23
2) Tighten the screws to the torque of 17 Ncm in
the order shown.
Confidential
Copyright @ 2008 NOKIA. All rights reserved
6210 Navigator RM-367, RM-386, RM-408, RM-419
Service Manual Level 1&2
ISSUE 1