Advent Navigation Owner's Manual page 25

Default data fi elds when cruising without a destination (tap and hold any of the
fi elds to change its value):
Field
Default data fi elds when navigating a route (tap and hold any of the fi elds to
change its value):
Field
Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains
it.
Shows the current time corrected with time zone off set.
The accurate time comes from the GPS satellites, and the
time zone information comes from the map or it can be set
manually in Regional settings. (The current time is always
displayed in the top left corner of menu screens.)
Description
Shows the distance you need to travel on the route before
reaching your fi nal destination.
Shows the time needed to reach the fi nal destination of
the route based on information available for the remaining
segments of the route. Historical traffi c data or traffi c
patterns are also taken into account whenever such
information exists..
Shows the estimated arrival time at the fi nal destination
of the route based on information available for the
remaining segments of the route. Historical traffi c data or
traffi c patterns are also taken into account whenever such
infromation exists.
Getting Started
25