Download  Print this page

Advertisement

11 Troubleshooting

Caution
Never remove the casing of this apparatus.
the system yourself.
If you encounter problems when using this
requesting service. If the problem remains
philips.com/support). When you contact the
is nearby and the model number and serial
number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Cannot play disc
Ensure that the disc label is inserted with
the printed side facing up.
from the centre to the edge in a straight
line.
This disc may be defective. Play another
disc.
CD-R/CD-RW.
Ensure that the CD is not encoded with
copyright protection technologies.
The CD skips tracks
Ensure that the CD is not damaged or
dirty.
Ensure that random mode is deactivated.
Disc cannot be ejected
Press and hold .
Preset stations lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device.
EN
25

Advertisement

Table of Contents

   Also See for Philips CEM3100

   Related Manuals for Philips CEM3100

Comments to this Manuals

Symbols: 0
Latest comments: