Table of Contents
Advertisement
Chapter 2 Installation Procedure
Before you proceed with the installation, it is necessary that you have enough information about the
Wireless PCI Card. Follow the procedure described below to install the WL-8314 under Windows
98SE/Me/2000/XP/Server 2003.
Note: If you had installed another Wireless Card before, please uninstall the existed drivers and
utilities first. If this is the first time to install this device, please refer to the following steps to
complete the installation.
2.1 Configuration Utility Installation
Note: The following installation operates under Window XP. The procedure also applies to
Window 98SE/Me/2000/Server 2003..
Please install the configuration utility before inserting WL-8314 into the PCI slot of the computer.
1.
Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed,
a menu screen will appear.
Click the "Configuration Utility" hyperlink in the WL-8314 field to initiate the installation
2.
procedure. You will see the below InstallShield Wizard window. Please click "Next" to
continue.
Note: If the above-mentioned screen does not appear, click "Start" at the taskbar. Then,
select "Run" and type "E:\utility\WL-8314\setup.exe", where E is your CD-ROM drive.
You may click "Browse" to specify the Destination Folder you prefer for the installation of utility.
3.
- 5 -
5
Advertisement
Table of Contents
