Power On And Off; Power On; Power Off - Xerox WorkCentre 5735 Getting Started Manual

Power On and Off

Power On

1. Ensure that your device is connected to a suitable
power supply and that the power cord is fully plugged
in to the electrical outlet of the device.
2. Press the Power switch. The entire powering on process
(to power on all installed options) takes less than 3
minutes.

Power Off

1. Press the Power switch. The Power Down options are displayed:
• If Energy Saver is selected, the device will
immediately enter the Power Saver Mode
appropriate to its configuration.
• If Quick Restart is selected and confirmed the
device will restart. Any copy jobs in the job list will
be deleted, print jobs in the job list are recovered.
• If Power Down is selected and confirmed the
device is powered down.
• If Cancel is selected the power down options will be cancelled and the device will be available
for use.
2. Select Power Down. A confirmation screen displays a warning that data may be lost if the device
is powered down.
Note: Confirming power down will result in the deletion of any jobs currently in the queue.
3. Select the Confirm button to power off the device.
The device will begin a controlled power down sequence. It remains on for approximately 45
seconds before switching off.
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Power On and Off
17
Getting Started