Placing Conference Calls - Inter-Tel 8600 User Manual

P C
LACING ONFERENCE
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
While on the first call, press
1.
Place another intercom or outside call.
2.
Press
3.
more call on hold.)
Press
4.
During the conference call, you can do the following:
•
To place the conference on hold: Press
without disconnecting the parties. To return to the conference, press
•
To drop out of the conference: Press
phone from the conference, but leaves the other parties connected.
•
To add parties to the conference:
Press
a.
Place a call to the party to be added to the conference.
b.
Press
c.
•
To end the conference and place all parties on individual hold: Press
then press
one party at a time by pressing
•
To mute your microphone: Press
phone on or off during the conference. If mute is enabled, you can hear the con-
ferenced parties, but they cannot hear you.
•
To transfer the conference to another extension or to voice mail: Press
and dial the desired extension number. Then hang up when you are ready to com-
plete the transfer.
®
Axxess Model 8600 Phone User Guide – Axxess IP Mode
C
ALLS
CNF
to place the call on hold. (If necessary, repeat this step to place one
CNF
to join all of the calls together in the conference.
CNF
. This leaves the conference parties connected.
CNF
twice to put yourself and the new party into the conference.
CNF
to place all of the parties on individual hold. You can then speak to
to put the call on hold.
. This places the conference on hold
and hang up. This removes your
CNF
.
and dial . This turns your micro-
4
3 1
.
CNF
and
CNF
XFR
19