Placing Calls On Hold - Inter-Tel 8600 User Manual

P C
LACING ALLS
You can place calls on hold in one of two ways: individual or system.
•
Individual Hold places the call on hold at one phone. It can then be directly
picked up at that phone or it can be picked up at another phone using the Reverse
Transfer (Call Pickup) feature (see
•
System Hold places the call on hold in the system. You can then pick up the call
at any phone that has a flashing button for the call, including the phone that
placed it on hold.
NOTE:
You cannot place intercom calls on system hold.
To place a call on Individual Hold:
Press the
1.
Hang up or place another call.
2.
To place an outside call on System Hold:
Press
1.
Hang up or place another call.
2.
To return to a call that is on hold:
Lift the handset and press
18
O H
N OLD
button.
and dial .
3 3 5
.
page 21).
®
Axxess Model 8600 Phone User Guide – Axxess IP Mode