Charging Your Battery - Motorola EX600 User Manual

Transmitters
Hide thumbs Also See for EX600:
Table of Contents

Advertisement

For optimum battery life and operation
use only Motorola brand chargers.
They were designed to operate as an
integrated energy system.

Charging your Battery

When the battery level is very low, you need to
recharge the battery before you can continue
to use your radio.
Place the radio with the battery attached or
the battery alone in the charger.
The charger's LED would indicate the
charging progress.
NOTE: Because new batteries or batteries
that have not been used for several
months could prematurely indicate full
charge (solid green LED), charge the
batteries for 14 to 16 hours prior to ini-
tial use to achieve optimal perfor-
mance.
26
English
LED color
Battery/Charger Status
No LED Indication
Battery inserted
incorrectly.
Single flash of
Successful charger power-
Green
up.
Flashing Red *
Battery is unchargeable or
not making proper contact.
Flashing Yellow
Charger is getting ready to
charge.
Red
Battery is charging.
Flashing Green
Battery is 90% (or more)
charged.
Green
Battery is fully charged.
Remove the battery from charger and use a pen-
*
cil eraser to clean the four metal contacts on the
bottom of the battery. Place the battery back into
the charger. If the LED indicator continues to flash
red, replace the battery.
A standard battery may require one hour to
charge to 90% capacity.

Advertisement

Table of Contents
loading

Table of Contents