Troubleshooting - LG BD670 Simple Manual

14

Troubleshooting

Troubleshooting
Symptom
The Power does not turned on.
The unit does not start
playback.
The angle cannot be changed.
Cannot play movie, photo or
music fi les.
The remote control does not
work properly.
4
The unit is plugged in, but the
power will not turn on or off .
The unit is not operating
normally.
There is no picture.
Picture noise appears.
Blu-ray 3D disc playback does
not output 3D views.
BD670-P_BINDLLK_SIM_ENG.indd 14 BD670-P_BINDLLK_SIM_ENG.indd 14
Cause & Solution
Plug the power cord into the wall outlet securely.
Insert a playable disc. (Check the disc type, colour system, and
regional code.)
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the Rating function or change the rating level.
Multi-angles are not recorded on the DVD Video being played.
The fi les are not recorded in a format that the unit can play.
The unit does not support the codec of the movie fi le.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
You can reset the unit as follows.
1. Press and hold the POWER button for at least fi ve seconds. This will
force the unit to power off then turn the unit back on.
2. Unplug the power cord, wait at least fi ve seconds, and then plug it in
again.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
Connect the video connection securely.
Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
The player's HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
You are playing a disc recorded in a colour system that is diff erent
from your TV.
Set the resolution which your TV accepts.
Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
Your TV may not support "HDMI 1.4 3D mandatory format".
The [3D Mode] option in the [Setup] menu is set to [Off ].
Set the option to [On].
11. 04. 05 11. 04. 05 9:06 9:06