An Error Message Is Displayed On The Screen - Canon Pixma iP90 User Manual

An Error Message is Displayed on the Screen

Error Writing/Output to USBnnn or MPUSBPRNnn
Have you replaced an ink tank with a new one? is Displayed
Low Ink Warning Displays Ink Tank with '?'
Other Error Messages
Error Writing/Output to USBnnn or MPUSBPRNnn
Ensure that the printer is turned on.
If the POWER lamp is off, turn the printer on.
When the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops
flashing.
Ensure that paper is loaded.
There is a possibility that the "No paper" error has not been reset.
Load paper and press the RESUME /CANCEL button.
Ensure that the printer port setting corresponds to the printer interface connection.
(1) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(2) Click the Ports tab (or Details tab), and then select MPUSBPRNnn (Canon iP90) or USBnnn
(Canon iP90) ("n" represents a number) in the Print to the following port.
Ensure that the printer is securely connected to the computer.
Note If you are using a switch box or other devices, remove and reconnect the printer directly to
the computer and try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and try printing
again.
Verify the printer port status.
(1) Right-click My Computer and select Properties.
(2) Click the Hardware tab, Device Manager , and double-click Universal serial bus controller , USB
Printing Support.
In Windows Me or Windows 98, click Universal serial bus controller on the Device Manager tab, and
then double-click Canon iP90.
(3) On the General tab, ensure that there is any indication of a problem with the device.
If spooling action is abnormal, disable it to send the print data directly to the printer
and try printing again. (In Windows Me or Windows 98)
(1) Open the Printer Properties dialog box.