Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
Press Copy, and then press 8.
This displays the
It is easy to set
using the HP Image Zone software that came with your HP all-in-one. With one click of
your mouse button, you can set a photo to copy with
document to copy with
and text to copy with both
information, see the onscreen HP Image Zone Help.
Make a poster
You can use the
and assemble them into a poster.
Make sure you have paper loaded in the input tray.
Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
Press 2, and then press 6.
This displays the
The default poster size is two pages wide.
Start Copy Black
After you select the poster width, the HP all-in-one adjusts the length automatically
to maintain the proportions of the original.
If the original cannot be enlarged to the selected poster size because it exceeds
the maximum zoom percentage, an error message appears that tells you to try a
smaller width. Select a smaller poster size and make the copy again.
You can be even more creative with your photos by using the HP Image Zone software
that came with your HP all-in-one. For more information, see the onscreen HP Image
and then selects Enhancements.
to highlight the
settings for photos and other documents you copy by
enhancements, or a document that contains both images
feature to create an enlarged copy of your original in sections
to display the
to highlight a page width for the poster, and then press OK.
enhancement setting, and then press OK.
enhancements turned on. For more
menu and then selects Poster.
enhancements, a text