Download Print this page

HP 2600/2700 User Manual: Set Backup Fax Reception; Use Error Correction Mode

Hewlett-packard photo printer user guide.
Hide thumbs

Advertisement

This displays the
Reduction.
3
Press
4
Press OK.

Set backup fax reception

The HP all-in-one stores all received faxes in memory. If there is an error condition that
prevents the HP all-in-one from printing the faxes,
to continue receiving faxes. During the error condition, with
enabled, the faxes are stored in memory.
For example, if the HP all-in-one is out of paper and
enabled, all received faxes are stored in memory. After you load more paper, you can
print the faxes. If you disable this feature, the HP all-in-one will not answer incoming fax
calls until the error condition is resolved.
Error conditions, such as the following, may prevent the HP all-in-one from printing
faxes:
There is no paper loaded in the input tray
There is a paper jam
The print-carriage access door is open
The print carriage is stalled
During normal operation (whether
one stores all faxes in memory. After the memory becomes full, the HP all-in-one
overwrites the oldest, printed faxes as it receives new faxes. If you want to delete all the
faxes in memory, turn off the HP all-in-one by pressing the
Note
If
Backup Fax Reception
stores the faxes it receives in memory as "unprinted." All unprinted faxes remain
in memory until they are printed or deleted. When the memory becomes full of
unprinted faxes, the HP all-in-one will not receive any more fax calls until the
unprinted faxes are printed or deleted from memory. For information on printing
or deleting faxes from memory, see
The default
To set backup fax reception from the control panel
1
Press Setup.
2
Press 5, and then press
This displays the
Reception.
3
Press
4
Press OK.
Use error correction mode
Error Correction Mode
detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or might even
be reduced, on good phone lines. On poor phone lines, ECM increases sending time
and phone charges, but sends the data much more reliably. The default setting is on.
User Guide
Advanced Fax Setup
to select
Off
or On.
is
Backup Fax Reception
5
again.
Advanced Fax Setup
to select
On
or Off.
(ECM) eliminates data that is lost due to poor phone lines by
menu and then selects
Backup Fax Reception
Backup Fax Reception
Backup Fax Reception
On
and there is an error condition, the HP all-in-one
Reprint or delete the faxes in
setting is On.
menu and then selects
Automatic
allows you
Backup Fax Reception
is
is
On
or Off), the HP all-in-
On
button.
memory.
Backup Fax
121

Advertisement

Troubleshooting

   Related Manuals for HP 2600/2700

Comments to this Manuals

Symbols: 0
Latest comments: