Husqvarna 225BX-SERIES Operator's Manual page 11

Starter device (18)
and starter handle (17)
The starter device is located at the top on the
engine shrouding and engages in the crank shaft
only when the starter handle is pulled.
Fuel cap (8)
The fuel cap (14) is located at the top of the engine
shrouding and has a gasket, which prevents fuel
from leaking out.
Air filter (9)
The air filter consists of foam-rubber filter medium,
integrated in a plastic casing. The air filter should be
cleaned at specific intervals. Otherwise, the power
blower will consume too much fuel, the performance
will be reduced and an oily deposit may form on the
spark plug electrodes.
Choke (10)
The choke is located at the top of the engine shroud-
ing and should be used every time the engine is
cold-started.
Adjusting the carburetor (19)
There are three adjusting screws for adjusting the
carburetor:
• Low speed jet
• High speed jet
• Adjustment screw for idling
Adjusting the carburetor involves adapting the
engine to local operating conditions, e.g. climate,
altitude, gasoline and type of two-stroke engine oil
used.
For details about carburetor adjustment,
see page 20.
DESCRIPTION
17
18
8
9
10
19
11
English –