Troubleshooting; Operation - Whirlpool W10417000B Use & Care Manual

TRO U B L E S H O O T I N G
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
In the U.S.A., www.whirlpool.com

Operation

PROBLEM
The refrigerator will not
operate
30
to possibly avoid the cost of a service call.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
POSSIBLE CAUSES
Check electrical supply
Check controls
New installation
Refrigerator Control is in Showroom
mode (on some models)
In Canada, www.whirlpool.ca
SOLUTIONS
Plug the power cord into a grounded 3 prong outlet.
Do not use an extension cord.
Make sure there is power to the outlet. Plug in a lamp to see
if the outlet is working.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Make sure the controls are turned on. See "Using the
Control(s)."
Allow 24 hours following installation for the refrigerator to
cool completely.
NOTE: Adjusting the temperature controls to the coldest
setting will not cool either compartment more quickly.
If the refrigerator is in Showroom mode, cooling is turned off
and "Showroom" will be illuminated on the control panel. See
"Using the Control(s)" for more information.