HP LaserJet 1022n User Manual

Hewlett-packard laserjet printer user guide.
Hide thumbs
HP LaserJet 1022, 1022n, 1022nw
User Guide

Advertising

   Related Manuals for HP LaserJet 1022n

   Summary of Contents for HP LaserJet 1022n

  • Page 1

    HP LaserJet 1022, 1022n, 1022nw User Guide...

  • Page 3

    HP LaserJet 1022, 1022n, and 1022nw printers User Guide...

  • Page 4

    Part number: Q5912-90949 Edition 2, 03/2006 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

  • Page 5: Table Of Contents

    Web links for drivers, software, and support ...2 User guide links ...2 Where to look for more information ...2 Printer configurations ...3 HP LaserJet 1022 printer ...3 HP LaserJet 1022n printer ...3 HP LaserJet 1022nw printer ...3 Walkaround ...4 Printer control panel ... 5 Media paths ...6 Priority feed slot ...

  • Page 6: Table Of Contents

    Envelopes ... 2 9 Cardstock and heavy media ...30 Letterhead and preprinted forms ...31 Choosing paper and other media ...32 HP media ... 3 2 Media to avoid ...32 Media that might damage the printer ...32 Loading media into the input trays ...34 Priority feed slot ...

  • Page 7: Table Of Contents

    Paper handling problems ...68 Media jam ...68 Print is skewed (crooked) ...68 More than one sheet of media feeds through the printer at one time ...68 Printer does not pull media from the media input tray ...68 Printer curled the media ...69 Print job is extremely slow ...69...

  • Page 8: Table Of Contents

    Paper use ...95 Plastics ...95 HP LaserJet printing supplies ...96 HP printing supplies returns and recycling program information ...96 Paper ...96 Material restrictions ...96 For more information ...96 Material safety data sheet ... 9 8 Appendix C Warranty and licensing Hewlett-Packard limited warranty statement ...99...

  • Page 9: Printer Basics

    Printer basics This chapter provides information on the following topics: ● Quick access to more information ● Printer configurations ● Walkaround ● Printer control panel ● Media paths ● Printer software ● Printer media considerations ENWW...

  • Page 10: Quick Access To More Information, Web Links For Drivers, Software, And Support, User Guide Links

    The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models. Web links for drivers, software, and support If you need to contact HP for service or support, use one of the following links. HP LaserJet 1022 printer ● In the United States, see http://www.hp.com/support/lj1022/.

  • Page 11: Printer Configurations, Hp Laserjet 1022 Printer, Hp Laserjet 1022n Printer, Hp Laserjet 1022nw Printer

    For more information about printer drivers, see http://www.hp.com/support/lj1022/. NOTE HP LaserJet 1022nw printer The HP LaserJet 1022nw printer includes all of the features of the HP LaserJet 1022n printer with the addition of integrated 802.11b/g wireless connectivity. NOTE For more information about this product, see the HP LaserJet 1022nw Wireless User Guide.

  • Page 12: Walkaround, Priority Feed Slot 3

    Walkaround The following illustrations identify the components of the HP LaserJet 1022, 1022n, and 1022nw printers. Output bin Input tray cover 250-sheet main input tray Priority feed slot Output media support Print cartridge door ANCEL button Go light 10 Ready light...

  • Page 13: Printer Control Panel

    Printer control panel The printer control panel is composed of three lights and two buttons. The HP LaserJet 1022nw printer has an additional light at the top of the control panel. These lights produce patterns that identify your printer's status.

  • Page 14: Media Paths, Priority Feed Slot, Main Input Tray

    Media guides ensure that the media is correctly fed into the printer and that the print is not skewed (crooked on the media). When loading media, adjust the media guides to match the width of the media that you are using.

  • Page 15: Output Bin

    Output bin The output bin is located on the top of the printer. Printed media is collected here in the correct sequence. The output media support provides improved stacking for large print jobs. ENWW Media paths...

  • Page 16: Printer Software, Supported Operating Systems, Printer Software For Windows Computers, Printer Drivers

    Printer software The following sections describe the supported operating systems and the software that are provided with the HP LaserJet 1022, 1022n, and 1022nw printers. Not all software is available in all languages. NOTE Supported operating systems The printer comes with software for the following operating systems: ●...

  • Page 17: Printer Properties (driver), Printer Properties Online Help

    Printer properties (driver) Printer properties control the printer. You can change the default settings, such as media size and type, printing multiple pages on a single sheet of media (N-up printing), resolution, and watermarks. You can access the printer properties in the following ways: ●...

  • Page 18: Print Setting Priorities, Printer Software For Macintosh Computers, Embedded Web Server

    There are two ways to change print settings for this printer: in the software application or in the printer driver. For the HP LaserJet 1022n and HP LaserJet 1022nw printers, you can also change print settings through the embedded web server. Changes made to print settings are prioritized according to where the changes are made, as follows: ●...

  • Page 19

    IP address or hostname of the printer in a web browser (such as Netscape Navigator or Microsoft® Internet Explorer) on any computer. You can use the embedded web server to configure the printer, view status information, purchase printer supplies, and obtain troubleshooting information.

  • Page 20: Printer Media Considerations, Supported Media Sizes

    HP has no control. Before purchasing a large quantity of media, make sure that it meets the requirements specified in this user guide and in the HP LaserJet printer family print media guide. The guidelines can be downloaded from Ordering supplies before you purchase a large quantity.

  • Page 21: Printer Connections

    Printer connections This chapter provides information on the following topics: ● USB connections ● Network connections ● Wireless connections ● Wireless printing ENWW...

  • Page 22: Usb Connections, Connecting The Usb Cable

    USB connections The HP LaserJet 1022, 1022n, and 1022nw printer models support USB 2.0 High Speed connections. Connecting the USB cable 1. Plug the USB cable into the printer. 2. Plug the other end of the USB cable into the computer when prompted to do so during the software installation.

  • Page 23: Network Connections 1, Connecting To The Network 1

    The HP LaserJet 1022n and HP LaserJet 1022nw printers can connect to networks through the internal network port. The HP LaserJet 1022nw printer can also connect to 802.11b/g wireless networks. External network print servers are available for the HP LaserJet 1022n and 1022nw printers.

  • Page 24: Connect The Printer To A Wired Network, Install The Printer Software

    Connect the printer to a wired network To connect the HP LaserJet 1022n or HP LaserJet 1022nw printer to a wired network, you need the following: ● Functional wired network ● CAT-5 Ethernet cable To connect the printer to the network, perform the following steps: 1.

  • Page 25: Wireless Connections

    The HP LaserJet 1022n printer supports the IEEE 802.11b/g standard for wireless NOTE networking and Bluetooth wireless connectivity options through optional external accessories. For a complete list of available internal HP Jetdirect wireless print servers and HP bt1300 Wireless Printer Adapters (Bluetooth), see For more information about wireless printing, see...

  • Page 26: Wireless Printing, Ieee 802.11b/g Standard, Bluetooth

    Optional external HP Jetdirect 802.11b/g print servers are available for USB connections. See the documentation that came with the HP LaserJet 1022nw printer for more information. Bluetooth...

  • Page 27: Printer Information Pages 2

    Managing the printer This chapter provides information on the following topics: ● Printer information pages ● Using the embedded web server ENWW...

  • Page 28: Demo, Configuration, Printer Test

    Configuration page The Configuration page lists current settings and properties of the printer. It also contains a status log report. You can print a Configuration page from the printer or the embedded web server. To print the Configuration page from the printer, press the printer is ready (Ready light on).

  • Page 29: Using The Embedded Web Server, To Open The Embedded Web Server

    The embedded web server can be directly accessed on the HP LaserJet 1022n and HP LaserJet 1022nw printers. You do not need to install any software on the computer. You only need to have a supported web browser. To use the embedded web server, you must have Apple Safari, Microsoft Internet Explorer V5.5 or later, or Netscape Navigator V4.75 or...

  • Page 30: Settings Tab, Networking Tab, Other Links

    Connecting might require that you close and then reopen the embedded web server. ● HP Instant Support: This link connects you to a set of dynamic web pages to solve specific problems and to determine what additional services are available for the printer.

  • Page 31: Printing Tasks

    Printing tasks This chapter provides information on the following topics: ● Manual feed ● Canceling a print job ● Understanding print quality settings ● Optimizing print quality for media types ● Guidelines for using media ● Choosing paper and other media ●...

  • Page 32: Manual Feed, To Print Using Manual Feed

    To print using manual feed 1. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) 2. On the Paper/Quality tab, select Manual Feed from the Source is drop-down list.

  • Page 33: Canceling A Print Job

    Windows print queue: If a print job is waiting in a print queue (computer memory) or print spooler, delete the job there. Click Start, Settings, and Printers or Printers and Faxes. Double-click the HP LaserJet 1022 icon to open the window, select your print job, and click Delete or Cancel.

  • Page 34: Understanding Print Quality Settings 2

    You can also use the print quality settings to optimize the print quality for a specific media type. See information. You can change the settings in the printer properties to accommodate the types of jobs you are printing. The following are the settings: ●...

  • Page 35: Optimizing Print Quality For Media Types

    You can access the optimizing feature from the Paper/Quality tab in your printer driver or from the embedded web server. The HP LaserJet 1022, 1022n, and 1022nw printers provide a number of print modes that allow the unit to adapt more specifically to the printer's media environment. The following tables provide an overview of the driver print modes.

  • Page 36: Guidelines For Using Media, Paper

    Jamming or damage to printer Problems with feeding The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored NOTE paper or preprinted forms use inks that are compatible with the printer temperature. The printer's maximum temperature is 200°C (392°F) for 0.1 second.

  • Page 37: Labels, Transparencies 2, Envelopes 2

    Labels HP recommends that you print labels from the priority feed slot. Do not feed a sheet of labels through the printer more than once. The adhesive degrades CAUTION and might damage the printer. Label construction When selecting labels, consider the quality of the following components: ●...

  • Page 38: Cardstock And Heavy Media

    Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the printer. The printer's maximum temperature is 200°C (392°F). The extra flaps and strips might cause wrinkling, creasing, or jams.

  • Page 39: Letterhead And Preprinted Forms

    Cardstock construction ● Smoothness: The 135-157 g/m of 100-180 Sheffield; 60-135 g/m of 100-250 Sheffield. ● Construction: Cardstock should lie flat with less than 5 mm (0.2 inches) of curl. ● Condition: Make sure that the cardstock is not wrinkled, nicked, or otherwise damaged. ●...

  • Page 40: Choosing Paper And Other Media, Hp Media, Media To Avoid

    HP Premium Choice LaserJet Paper Media to avoid The HP LaserJet 1022, 1022n, and 1022nw printers can handle many types of media. Use of media outside the printer's specifications will cause a loss of print quality and increase the chance of paper jams.

  • Page 41

    Do not use paper that is embossed or coated and is not designed for the temperatures of the printer's image fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second. HP produces a selection of media that is designed for the HP LaserJet 1022, 1022n, and 1022nw printers.

  • Page 42: Loading Media Into The Input Trays, Sheet Main Input Tray

    When you add new media, make sure that you remove all of the media from the input tray NOTE and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the printer at one time, reducing media jams. Chapter 4 Printing tasks Printer media considerations for more information.

  • Page 43: Printing An Envelope, Printing Envelope

    1. Before loading the envelope, slide the media guides outward to slightly wider than the envelopes. If the envelope has a flap on the short edge, feed that edge into the printer first. NOTE 2. Place the envelope with the side to be printed facing up and the top edge along the left media guide.

  • Page 44

    5. On the Paper/Quality tab (the Paper Type/Quality tab for some Macintosh drivers), select Envelope as the media type. NOTE Not all printer features are available in all drivers or operating systems. See the printer properties (driver) online Help for information about availability of features for that driver. 6. Print the envelope.

  • Page 45: Printing Multiple Envelopes

    3. Place the envelopes with the side to be printed facing up and the top edge along the left media guide. Stack up to 15 envelopes. If the envelopes have a flap on the short edge, feed that edge into the printer first. NOTE ENWW for more information.

  • Page 46

    5. Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer properties (driver) Not all printer features are available from all drivers or operating systems. See the printer NOTE properties (driver) online Help for information about availability of features for that driver.

  • Page 47: Printing On Transparencies Or Labels

    HP transparency film and HP LaserJet labels. See information. Be sure to set the correct media type in the printer settings as instructed below. The printer CAUTION adjusts the fuser temperature according to the media type setting. When printing on special media such as transparencies or labels, this adjustment prevents the fuser from damaging the media as it passes through the printer.

  • Page 48: Printing On Letterhead And Preprinted Forms

    Printing on letterhead and preprinted forms The HP LaserJet 1022, 1022n, and 1022nw printers can print on letterhead and preprinted forms that can withstand temperatures of 200°C (392°F). 1. Load the paper with the top forward and the side to be printed facing up. Adjust the media guides to fit the width of the paper.

  • Page 49: Printing On Custom-size Media And Cardstock

    Printing on custom-size media and cardstock The HP LaserJet 1022, 1022n, and 1022nw printers can print on custom-size media or cardstock between 76 x 127 mm (3 x 5 inches) and 216 x 356 mm (8.5 x 14 inches). Use the main input tray for multiple sheets. See Make sure that the sheets are not stuck together before you load them.

  • Page 50: Printing On Both Sides Of The Paper (manual Two-sided Printing)

    3. Print the document. NOTE Not all printer features are available from all drivers or operating systems. See the printer properties (driver) online Help for information about availability of features for that driver. 4. After side one has printed, gather the printed pages. Turn the printed side down, and straighten the stack.

  • Page 51

    5. Place the stack back in the input tray. Side one should be facing down with the bottom edge feeding into the printer first. Replace the media input tray cover. 6. Press the button on the control panel to print side two.

  • Page 52: Printing Multiple Pages On A Single Sheet Of Paper (n-up Printing)

    2. On the Finishing tab (the Layout tab for some Macintosh drivers), select the correct number of pages per side of media. Not all printer features are available from all drivers or operating systems. See the printer NOTE properties (driver) online Help for information about availability of features for that driver.

  • Page 53: Printing Booklets

    3. On the Finishing tab, select the option to Print On Both Sides (Manually). Select the appropriate binding option, and click OK. Print the document. Not all printer features are available from all drivers or operating systems. See the printer NOTE properties (driver) online Help for information about availability of features for that driver.

  • Page 54

    6. Press the button, and wait for side two to print. 7. Fold and staple the pages. Chapter 4 Printing tasks ENWW...

  • Page 55: Printing Watermarks

    Windows 2000 and XP). See 2. On the Effects tab, select the watermark you want to use. Not all printer features are available from all drivers or operating systems. See the printer NOTE properties (driver) online Help for information about availability of features for that driver.

  • Page 56

    Chapter 4 Printing tasks ENWW...

  • Page 57: Cleaning The Printer 5

    Maintenance This chapter provides information on the following topics: ● Cleaning the printer ● Changing the pickup roller ● Cleaning the pickup roller ● Changing the printer separation pad ● Redistributing toner ● Changing the print cartridge ENWW...

  • Page 58: Cleaning The Print Cartridge Area

    1. Turn the printer off, and then unplug the power cord. Wait for the printer to cool. To prevent damage, do not expose the print cartridge to light. Cover the print cartridge if CAUTION necessary.

  • Page 59: Cleaning The Printer Media Path

    5. Plug the printer into the power outlet, and then turn on the printer. Cleaning the printer media path If you are experiencing toner specks or dots on the printouts, you can use the HP LaserJet cleaning utility to remove excess media and toner particles that can accumulate on the fuser assembly and rollers.

  • Page 60

    The cleaning process takes approximately 3 minutes. The cleaning page will stop NOTE periodically during the cleaning process. Do not turn the printer off until the cleaning process has finished. You might need to repeat the cleaning process several times to thoroughly clean the printer.

  • Page 61: Changing The Pickup Roller

    Failure to complete this procedure might damage the printer. CAUTION 1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool. To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the CAUTION print cartridge with a sheet of paper.

  • Page 62

    4. Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front. 5. Gently pull the pickup roller up and out. 6. Position the new pickup roller in the slot. The circular and rectangular slots on each side will prevent you from installing the roller incorrectly.

  • Page 63

    8. Reinstall the print cartridge, and close the print cartridge door. 9. Plug the printer into the power outlet, and then turn on the printer. ENWW Changing the pickup roller...

  • Page 64: Cleaning The Pickup Roller

    3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. 4. Allow the pickup roller to dry completely before you reinstall it in the printer (see Changing the pickup Chapter 5 Maintenance roller).

  • Page 65: Changing The Printer Separation Pad

    Before you change the separation pad, clean the pickup roller. See NOTE 1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool. 2. At the back of the printer, unscrew the two screws holding the separation pad in place.

  • Page 66

    4. Insert the new separation pad, and screw it into place. 5. Plug the printer into the power outlet, and turn on the printer. Chapter 5 Maintenance ENWW...

  • Page 67: Redistributing Toner 5

    To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the CAUTION print cartridge with a sheet of paper. 1. Open the print cartridge door, and remove the print cartridge from the printer. To prevent damage to the print cartridge, hold the print cartridge at each end. CAUTION 2.

  • Page 68

    If the print is still light, install a new print cartridge. See Changing the print cartridge instructions. Chapter 5 Maintenance ENWW...

  • Page 69: Changing The Print Cartridge

    Changing the print cartridge CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print cartridge with a sheet of paper. 1. Open the print cartridge door, and remove the old print cartridge. See the recycling information inside the print cartridge box.

  • Page 70

    position. Close the print cartridge door. CAUTION If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric. Chapter 5 Maintenance ENWW...

  • Page 71: Finding The Solution 6

    ● Finding the solution ● Status light patterns ● Paper handling problems ● Printed page is different than what appeared on screen ● Printer software problems ● Improving print quality ● Clearing jams ● Wired network setup problem solving ENWW...

  • Page 72: Step 1: Is The Printer Set Up Correctly, Step 2: Is The Ready Light On

    Finding the solution You can use this section to find the solution to common printer problems. Step 1: Is the printer set up correctly? ● Is the printer plugged into a power outlet that is known to work? ● Is the no/off switch in the on position? ●...

  • Page 73: Step 4: Is The Print Quality Acceptable

    Step 6: Does the printed page look like you expected? Contact HP support ● In the United States, see series printer. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models. ● In other locations, see http://www.hp.com.

  • Page 74: Status Light Patterns

    Symbol for "light off" Symbol for "light on" Symbol for "light blinking" State of the printer Ready The printer is ready to print. Processing data The printer is receiving or processing data. Cleaning mode A Cleaning page or a Printer Test page is printing.

  • Page 75

    Unplug the printer for 30 minutes, and then plug the printer back in power outlet. If the printer still has an error, contact HP Support. See Contact HP support. Make sure that there is power. Unplug both ends of the power...

  • Page 76: Paper Handling Problems, Media Jam, Print Is Skewed (crooked)

    Choose the item that best describes the problem: ● Media jam ● Print is skewed (crooked) ● More than one sheet of media feeds through the printer at one time ● Printer does not pull media from the media input tray ● Printer curled the media ●...

  • Page 77: Printer Curled The Media, Print Job Is Extremely Slow

    Print job is extremely slow The maximum speed of the printer is up to 18 ppm for A4 media and 19 ppm for letter media for the HP LaserJet 1022, 1022n, 1022nw printers. Your print job might be very complex. Try the following: ●...

  • Page 78: Printed Page Is Different Than What Appeared On Screen, Garbled, Incorrect, Or Incomplete Text

    ● The wrong printer driver might have been selected when the software was installed. Make sure that the HP LaserJet 1022 printer driver is selected in the printer properties. ● If a specific file prints garbled text, there might be a problem with that specific file. If a specific application prints garbled text, there might be a problem with that application.

  • Page 79: Page Format Is Different Than On Another Printer, Graphics Quality 7

    ● Create documents and print them using the same printer driver (printer software) and printer properties settings regardless of which HP LaserJet printer you use to print them. ● Change the resolution, paper size, font settings, and other settings. See properties (driver) ●...

  • Page 80: Printer Software Problems

    Printer software problems Windows problems Problem A printer driver for the HP LaserJet 1022 printer is not visible in the Printer folder. An error message was displayed during the software installation. Chapter 6 Problem solving Solution ● Restart the computer.

  • Page 81

    Reinstall the printer software. In the Windows task bar, click Start, select Programs, select HP, select HP LaserJet 1020 series, and then click Uninstall HP LaserJet 1020 series. Turn the printer off. Install the printer software from the CD. Turn the printer back on.

  • Page 82: Improving Print Quality 7, Light Or Faded Print, Toner Specks, Dropouts

    Chapter 6 Problem solving ● The toner supply is low. See Redistributing toner for more information. ● The media might not meet HP's media specifications (for example, the media is too moist or too rough). See Printer media considerations for more information. ●...

  • Page 83: Vertical Lines, Gray Background, Toner Smear

    NOTE If these steps do not correct the problem, contact an HP-authorized dealer or service representative. Vertical lines Gray background Toner smear ENWW ● Make sure that the tray cover is in place. ● The photosensitive drum inside the print cartridge has probably been scratched.

  • Page 84: Loose Toner, Vertical Repetitive Defects, Misformed Characters

    ● The print cartridge might be damaged. If a repetitive mark occurs at the same spot on the page, install a new HP print cartridge. Changing the print cartridge instructions. ● The internal parts might have toner on them.

  • Page 85: Page Skew, Curl Or Wave, Wrinkles Or Creases

    Also, try rotating the media 180° in the input tray. ● The fuser temperature might be too high. In your printer driver, make sure that the appropriate media type is selected. If the problem persists, select a media type that uses a lower fuser temperature, such as transparencies or light media.

  • Page 86: Toner Scatter Outline 7, Water Droplets On Bottom Edge

    Use media designed for laser printers. See Printer media considerations information. NOTE Moisture in the printer is condensing on the fuser assembly and dropping onto the media. In excessively hot and humid areas, media retains moisture. Water droplets do not damage the printer.

  • Page 87: Clearing Jams, Typical Media Jam Locations, Removing A Jammed

    ● Output path: If the page is sticking out of the output bin, see for instructions. There might be loose toner in the printer after a media jam. This toner clears up after a few NOTE sheets are printed. Removing a jammed page Media jams might result in loose toner on the page.

  • Page 88

    CAUTION To prevent damage to the printer when clearing jams, including jams in the output bin, always open the print cartridge door and remove the print cartridge. 1. Open the print cartridge door, and remove the print cartridge. To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the CAUTION print cartridge with a sheet of paper.

  • Page 89

    After clearing a media jam, you might need to turn the printer off and turn it back on again. When you add new media, remove all of the media from the input tray and straighten the NOTE stack of new media.

  • Page 90: Wired Network Setup Problem Solving

    Wired network setup problem solving If the computer is unable to discover the HP LaserJet 1022n or HP LaserJet 1022nw printer, perform the following steps: 1. Check the cables to ensure that they are properly connected. Check all of the following connections: ●...

  • Page 91: A Printer Specifications

    Printer specifications This appendix provides information on the following topics: ● Environmental specifications ● Acoustic emissions ● Electrical specifications ● Physical specifications ● Printer capacities and ratings ● Memory specifications ● Port availability ENWW...

  • Page 92: Environmental Specifications

    Environmental specifications Operating environment Storage environment Values are current as of April 1, 2004. Values are subject to change without notice. See NOTE http://www.hp.com/support/lj1022/ Appendix A Printer specifications Install in a well-ventilated, dust-free area. Printer plugged into an AC outlet: ●...

  • Page 93: Acoustic Emissions

    Values are subject to change without notice. See current information. Configuration tested: HP LaserJet 1022 base unit, standard tray, A4 paper, and simplex continuous print. HP LaserJet 1022 speed is 18 ppm for A4 and 19 ppm for letter. ENWW 1, 2 Declared per ISO 9296...

  • Page 94: Electrical Specifications 8

    PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant-on fusing. HP LaserJet 1022 speed is 18 ppm for A4 media and 19 ppm for letter media. The heat dissipation in Ready mode is 20 BTU/hour.

  • Page 95: Physical Specifications

    Physical specifications Dimensions Weight (2,000-page cartridge installed) Values are current as of April 1, 2004. Values are subject to change without notice. See NOTE http://www.hp.com/support/lj1022/ ENWW ● Width: 370 mm (14.6 inches) ● Depth: 245 mm (9.6 inches) ● Height: 241 mm (9.5 inches) 6.3 kg (13.9 lb)

  • Page 96: Printer Capacities And Ratings

    Printer capacities and ratings Print speed Main input tray capacity Priority feed slot capacity Top (face down) output bin capacity Minimum paper size Maximum paper size Media weight Base memory Print resolution Duty cycle Appendix A Printer specifications ● 18 ppm for A4 and 19 for letter ●...

  • Page 97: Memory Specifications

    Memory specifications Base memory 8 MB RAM ENWW Memory specifications...

  • Page 98: Port Availability

    Port availability Network (HP LaserJet 1022n and HP LaserJet 1022nw printers only) Wireless (HP LaserJet 1022nw printer only) Appendix A Printer specifications Compatible with USB 2.0 High Speed specifications RJ-45, Ethernet 10/100 802.11b/g ENWW...

  • Page 99: Fcc Compliance

    ● Consult your dealer or an experienced radio/TV technician. Any changes or modifications to the printer that are not expressly approved by Hewlett- NOTE Packard could void the user's authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.

  • Page 100: Declaration Of Conformity

    3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the product number(s). 4) Regulatory information regarding radio module approvals for the HP LaserJet 1022nw (Regulatory Model Number: BOISB-0405-01) can be found in the wireless user guide for that product.

  • Page 101: Regulatory Statements, Laser Safety Statement, Canadian Doc Regulations, Korean Emi Statement 9

    Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a "Class 1" laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.

  • Page 102: Laser Statement For Finland 9

    överskrider gränsen för laserklass 1. HUOLTO HP LaserJet 1022, HP LaserJet 1022n, HP LaserJet 1022nw -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän...

  • Page 103: Environmental Product Stewardship Program, Protecting The Environment, Ozone Production, Energy Consumption 9, Paper Use, Plastics

    Environmental product stewardship program Protecting the environment Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment. Ozone production This product generates no appreciable ozone gas (O Energy consumption Power usage drops significantly while in PowerSave/Sleep mode, which saves natural resources and saves money without affecting the high performance of this product.

  • Page 104: Hp Laserjet Printing Supplies, Hp Printing Supplies Returns And Recycling Program Information, Paper, Material Restrictions

    HP printing supplies returns and recycling program information Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge in 86% of the world market where HP LaserJet supplies are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most HP LaserJet print cartridge boxes.

  • Page 105: Material Safety Data Sheet 9

    ● HP's end-of-life product return and recycling program ● Material safety data sheets Visit: http://www.hp.com/go/environment http://www.hp.com/hpinfo/community/ environment/productinfo/safety. ENWW Environmental product stewardship program...

  • Page 106: Material Safety Data Sheet

    Material safety data sheet Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by contacting the HP website at: msds or http://www.hp.com/hpinfo/community/environment/productinfo/safety. Appendix B Regulatory information http://www.hp.com/go/ ENWW...

  • Page 107: Hewlett-packard Limited Warranty Statement

    HP will replace software which does not execute its programming instructions due to such defects. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product.

  • Page 108

    TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.

  • Page 109: Hewlett-packard Software License Agreement

    No Disassembly or Decryption. You may not disassemble or decompile the Software unless HP's prior written consent is obtained. In some jurisdictions, HP's consent may not be required for limited disassembly or decompilation. Upon request, you will provide HP with reasonably detailed information regarding any disassembly or decompilation.

  • Page 110: Print Cartridge Limited Warranty

    Print cartridge limited warranty This HP product is warranted to be free from defects in materials and workmanship. This warranty does not apply to products that (a) have been refilled, refurbished, remanufactured or tampered with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside of the published environmental specifications for the printer product or (c) exhibit wear from ordinary use.

  • Page 111: Ordering Supplies 1

    HP parts and accessories This appendix provides information on the following topics: ● Ordering supplies ● 10/100 networking and wireless print servers ● Using HP print cartridges ENWW...

  • Page 112: Ordering Supplies

    You can increase the printer's capabilities with optional accessories and supplies. Use accessories and supplies specifically designed for the HP LaserJet 1020 series printer to ensure optimum performance. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models.

  • Page 113

    Separation pad for the Used to keep multiple printer sheets from feeding through the printer path. Input tray cover Used to cover the media in the input tray. Order number RL1-2066 RL1-0269...

  • Page 114: Networking And Wireless Print Servers

    10/100 networking and wireless print servers HP LaserJet 1022n Item and description HP Jetdirect 380x 802.11b wireless external print server (full-featured, USB port) Appendix D HP parts and accessories Order number J6061A ENWW...

  • Page 115: Using Hp Print Cartridges, Hp Policy On Non-hp Print Cartridges, Storing Print Cartridges

    This code represents a 30-month period beyond the date of production that facilitates efficient inventory management processes between HP and its resellers. It does not serve as an indication of toner life (shelf-life) or relate in any way to warranty terms and conditions.

  • Page 116

    Appendix D HP parts and accessories ENWW...

  • Page 117: Service And Support

    Service and support This appendix provides information on the following topics: ● Availability of support and service ● Guidelines for repacking the printer ● How to contact HP ENWW...

  • Page 118: Availability Of Support And Service, Hp Care Packā„¢ Services And Service Agreements

    Availability of these programs will vary depending upon your location. HP Care Pack™ Services and Service Agreements HP has various service and support options that meet a wide range of needs. These options are not part of the standard warranty. Support services may vary by location. For most printers HP offers both in-warranty and post-warranty HP Care Pack Services and Service Agreements.

  • Page 119: Guidelines For Repacking The Printer

    Use the following guidelines when repacking the printer: ● Remove and keep the print cartridge. If the print cartridge is left in the printer, severe damage to the printer may occur. To prevent damage to the print cartridge, store the print cartridge in its original packing CAUTION material, or store it so that it is not exposed to light.

  • Page 120: How To Contact Hp

    How to contact HP If you need to contact HP for service or support, use one of the following links: ● In the United States, see series printer. The HP LaserJet 1020 series printer includes the HP LaserJet 1022, 1022n, and 1022nw NOTE printer models.

  • Page 121

    56 print cartridge area 50 printer 50 clearing jams 79 configuration HP LaserJet 1022 printer 3 HP LaserJet 1022n printer 3 HP LaserJet 1022nw printer 3 Configuration page 20 connecting to the network 15 conserving toner 107 considerations...

  • Page 122

    4 power switch 4 preprinted forms, guidelines 31 print cartridge changing 61 door 4 life expectancy 107 redistributing toner 59 storing 107 using HP cartridges 107 warranty 102 where to return for recycling 96 print cartridge area, cleaning 50 ENWW...

  • Page 123

    34 location 4 overview 6 Ready light 4 recycling HP printing supplies returns and environmental program 96 where to return cartridges 96 redistributing toner 59 registration, embedded web server 22 regulatory statement Declaration of Conformity statement 92...

  • Page 124: Table Of Contents

    77 two-sided printing manual 42 USB port, location 4 USB, connecting the USB cable 14 user guide links 2 using HP print cartridges 107 warranty extended 110 print cartridge 102 product 99 watermarks, printing 47 web server, embedded 21...

  • Page 126

    © 2006 Hewlett-Packard Development Company, L.P. www.hp.com *Q5912-90949* *Q5912-90949* Q5912-90949...

This manual also for:

Laserjet 1022, Laserjet 1022nw

Comments to this Manuals

Symbols: 0
Latest comments: