Kenmore ELECTRIC BuILT-IN OVEN Use & Care Manual page 13

Setting Oven Controls
Setting the Warm Feature
pad turns ON the Serve Warm feature and will maintain an oven temperature of 170°F (77°C). The Warm
The
feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm
feature will shut the oven OFF automatically. The Warm feature may be used without any other cooking operations or
can be set to turn ON automatically after cooking has finished using TIMED BAKE or DELAY TIMED BAKE.
To set Warm:
1. Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.
2. Press . "- -" will appear in the display and the Warm indicator light above the pad will turn ON.
Note: If no further pads are touched within 25 seconds the request to turn ON Warm will be cleared.
3. Press or to start.
4. To turn Warm OFF at any time press
To set Warm to turn ON automatically:
1. Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Timed Bake.
2. Press . "- -" will appear in the display and the Warm indicator light above the pad will turn ON.
3. Press or to start. Warm is set to turn ON automatically after Timed Bake or Delayed Start Bake has
finished.
4. To turn Warm OFF at any time press
To Operate the Oven Light(s)
The interior oven light(s) will automatically turn ON when the oven door is opened.
Press to turn the interior light(s) ON and OFF whenever the door is closed.
The interior oven light(s) is (are) located at the upper left (and right, some models) rear wall of the oven interior and is cov-
ered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change
the interior oven light(s), see changing the Oven Light in the General Care & Cleaning section.
. The Warm indicator light above the pad will turn OFF.
. The Warm indicator light above the pad will turn OFF.
13