Page 1
Whynter 62 QT DUAL ZONE PORTABLE FRIDGE / FREEZER MODEL# : FM-62DZ Instruction Manual Congratulations on your new WHYNTER product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
TABLE OF CONTENT SAFETY PRECAUTIONS…….……………………………………..………………..3 PARTS AND FEATURES.…………………………………………………………….. 4 PROPER LOCATION……………………………………………………………………5 MOVEMENT AND INSTALLATION INSTRUCTIONS……………………….………5 OPERATING YOUR PORTABLE FREEZER..…………………………….……… 6-8 TEST-RUN……………………………………………………………………………….6 UNDERSTANDING THE TEMPERATURE CONTROL SETTING………………...6 TEMPERATURE ADJUSTMNET……………………………………….……………..7 FOOD STORAGE……………………………………………………………………….7 DEFROSTING AND DE-ODERIZING………………………………………………...7 NORMAL OPERATING SOUNDS AND FUNCTIONS..…………………………….8 CLEANING AND MAINTAINING YOUR PORTABLE FREEZER………………… 8 TROUBLESHOOTING……………………….…………………………………..…..9 WARRANTY……………………………………………………………………………..10...
SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: Do not use if the power supply cord is damaged. If damaged, it must be replaced by qualified technician/electrician.
PARTS AND FEATURES Your Whynter portable freezer is supplied with all the accessories you need to enjoy refrigeration almost anywhere. Below is an image of the freezer features and standard accessories. 1. Latch 2. Insulated lids 3. Wire baskets 4. Side handle 5.
Proper Location Because this unit is Position your portable freezer in a location where there is compressor based proper air circulation and electrical connections. appliance, ample Keep the portable freezer away from heat and direct space is required sunlight if possible.
OPERATING YOUR PORTABLE FREEZER Test-Run DC input power When powering your portable freezer with a standard 12 V socket, the unit will not work if socket has a voltage of less than 10.4 V. The unit will restart when the voltage is 11.8V or greater.
Temperature Adjustment 1. When the freezer is plugged in to a power outlet, press the “Set” button. The LED will display the factory pre-set temperature of 0°F 2. To adjust the temperature: a. Press the “Set” button again b. While the LED is flashing, press the “▲” or “▼” buttons to reach the desired temperature c.
Normal Operating Sounds and Functions It is normal to hear gurgling sounds caused by the flow of refrigerant when each cooling cycle ends. The surface temperature of the compressor can reach 158-194°F when running. The noise emitted by the cooling fan on the condenser is a normal function. ...
90F, the unit need longer to cool to the set temperature. The system is blocked. Contact service department via email at service@whynter.com The ice layer on the Defrost the freezer evaporator is too thick. The door is being opened The door should be opened as little and closed too frequently.
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY.
Need help?
Do you have a question about the FM-62DZ and is the answer not in the manual?
Questions and answers