Battery Test Did Not Run; Browser Does Not Display The Web Interface For An Installed Management Module; Browser Incorrectly Displays English Or Japanese Characters - HP A1353A User Manual

Ups management module
Table of Contents

Advertisement

Battery Test did not run

Possible Cause: The UPS is On Battery.
Action: The UPS must be in a certain state before the battery test runs. For more information, refer to the
section, "Parameters menu option
Browser does not display the web interface for an
installed management module
Action:
Be sure that the IP address and port number are correct. The default port number for non-secure
1.
browser connection is port 80. The default port number for secure SSL browser connection is 443.
Be sure that the web interface (HTTP/HTTPS) is enabled on the management module.
2.
Browser incorrectly displays English or Japanese
characters
Possible Cause: Another user with different language settings logs in to the web interface.
Action: Log out of the web interface, close the browser window, and then sign in to the web interface
again.
("Parameters
menu" on page 51)."
Troubleshooting 88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A1356aA1354aA6584aA6583aA6585aJ4367a ... Show all

Table of Contents