Upload the SSL certificate:
Open the SSL certificate file with a text editor.
Select all content.
Copy the selected content.
Paste the copied text to the SSL Key field.
sensitive information. Be sure that both ports are open.
Configure telnet access by doing one of the following:
Select Disable to disable telnet access.
Enable Telnet Port and enter the port number to use telnet.
Configure the session management settings.
(optional) Enable automatic signout and enter the number of minutes the management module
should wait before terminating an inactive session.
(optional) Enable retries allowed, enter the number of times a user can unsuccessfully log in to
the management module before the account is locked, and enter the number of minutes to wait
between an unsuccessful login and a new login attempt.
Enable FTP file upload to allow firmware and configuration upgrades.
Do one of the following:
Click Save Settings to save the information.
Click Undo Changes to undo the changes.
Click Help to view online help.
Event Notifications menu
Click Event Notifications in the left navigation frame to access the Event Notifications screen. This screen
enables administrators to configure event notification settings for the management module.
The Event Notifications screen contains the following:
Events tab (on page 65)
Email Setup tab (on page 66)
SNMP Traps tab (on page 67)
If you enable HTTPS, the management module also uses the HTTP port to pass non-
HP UPS Management Module web interface 64