Click the UPS tabs to view detailed information for each of the sub units in the parallel system. The
parallel system can contain up to six sub units.
Click Help to view online help.
Manual Control menu
Click Manual Control in the left navigation frame to display the Manual Control screen. This screen
contains manual commands such as Initiate Battery Test and Restart Management Module.
The Initiate Battery Test option is not available for all UPSs. To initiate a UPS battery test:
Select Initiate Battery Test.
Click Execute Command. The results of the test appear on the Parameters screen
on page 51) in the Test Results Summary field, and a log entry is created in the Application Log
Depending on the specific UPS model, this screen will vary.
Selecting this option might result in an ungraceful shutdown.
Do not run a battery test while the UPS is On Battery.
menu" on page 56).
HP UPS Management Module web interface 53