Download Print this page

HP A1353A User Manual: Checking The Error Led; Connecting The Network Cable

Ups management module.
Hide thumbs


Checking the Error LED

If the Error LED illuminates red or flashes red, see the "Troubleshooting (on page 87)" section for more

Connecting the network cable

Connect a standard Ethernet cable between the network connector on the management module and a
network jack.
This connection is used to access the management module remotely through telnet or the web interface.
The management module also uses the network connection to communicate to the configured agents and
to facilitate SNMP-based monitoring.
Installing the HP UPS Management Module 20


   Related Manuals for HP A1353A

   Related Content for HP A1353A

Comments to this Manuals

Symbols: 0
Latest comments: