TP-Link TL-WN781ND Quick Installation Manual

Quick Installation Guide
150Mbps Wireless N PCI Express Adapter
TL-WN781ND
MODEL NO.
2

Software Installation

Insert the TP-LINK Resource CD into the CD-ROM
1
drive.
Find the model TL-WN781ND and select Install
2
Driver&Utility.
7106504199

Package Contents

TL-WN781ND
Resource CD
System Requirement
· Windows XP · Windows Vista · Windows 7
(The installtion procedures in Windows XP/ Vista/ 7/8 are similar. Here takes the procedures in Windows 7 for example.)
The InstallShield Wizard window will appear.
3
Click Next to continue.
4 Select Install TP-LINK Wireless Con guration
Utility and Driver and then click Next.
1

Hardware Connection

150Mbps Wireless N PCI Express Adapter
MODEL NO. TL-WN781ND
QIG
Steps
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI Express slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI Express slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
· Windows 8
6. Turn on your computer.
Click Change to specify the destination location
5
or you can leave it default. Click Next to continue.
6 Click Install to install the driver and utility for your
adapter.
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click 'Cancel'.
For Windows XP
For Windows Vista
The installation process may take 1~2 minutes.
7
The following screen will then appear.
8
Click Finish to complete the setup.