Replacing The Freezer Drawer - GE 20 Owner's Manual And Installation Instructions

REPLACING THE FREEZER DRAWER

Two people may be required to complete
this procedure.
ATTACH AND SECURE THE DRAWER
1
FRONT TO THE SLIDES
Pull out the rail assemblies to the full length
A
on each side of the cabinet.
B Locate the slots on the inside of the rail
assemblies near the back.
C Insert the hooks at the back of the drawer
railings into the slots on the rail assemblies.
D Lower the front of the drawer, making sure the
tabs on the sides of the railings fit into the front
slots in the rail assemblies.
Hook
Slot
Installation Instructions
Slot
Rail assembly
Tab
(on some models)
ATTACH AND SECURE THE DRAWER
1
FRONT TO THE SLIDES
Replace the screws on both rail assemblies.
E
REPLACE THE FREEZER BASKET
2
Replace the lower freezer basket by lowering it
into the frame.
21
(cont.)
Screw