Troubleshooting Guide - Honeywell IS4225 ScanGlove Installation And User Manual

Fully automatic single-line laser barcode scanner
Table of Contents

Advertisement

T
ROUBLESHOOTING
The following guide is for reference purposes only. Contact a customer service
representative to preserve the limited warranty terms on page 24.
S
YMPTOMS
No LEDs, beep and there
is no visible laser
No LEDs, beep and there
is no visible laser
After scanning a bar
code, the Red and Green
LEDs are on, but no data
is being transmitted to the
host.
G
UIDE
P
C
OSSIBLE
AUSE
No Power is being
supplied to the
scanner
No power is being
supplied from the
USB port.
The scanner is not
configured properly
for communication
with the host.
(
)
S
Make sure the cable is plugged
into the host. Check the host
system's power cable, the outlet
and power strip.
The IS4225 requests 100mA from
the USB port. If the USB port
cannot supply this, a notification
window will appear on the screen.
Re-configure the scanner using the
appropriate codes for your scanner
model.
S
OLUTION
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents