Auto Dry Preset Cycle Settings
Auto Dry Cycles
Heavyweight mixed loads,
cotton towels, bedspreads
Denim jeans, jackets
Corduroys, work clothes
washable knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time. See "Changing
Cycles, Options and Modifiers."
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using
Timed Dry on a low temperature setting.
Use this cycle for drying small loads or loads that need a short
Use this cycle to help smooth out wrinkles from items, such as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Manual Preset Cycle Settings
Heavyweight, bulky items,
bedspreads, work clothes
Helps to smooth out
You can customize your cycles by selecting options.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a
mixed load or large items in the "Bulky/Bedding" cycle. When the
signal goes off, open the door to stop the dryer, rearrange the
load inside the dryer, close the door and restart the dryer to finish
the drying cycle. Rearranging the load will aid in the drying
For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to
NOTE: The Damp Dry Signal is available only with the Auto Dry
you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
Press WRINKLE GUARD
periodic tumbling at the end of a cycle.
Stop WRINKLE GUARD
or opening the dryer door.
For the Casual Auto Dry Cycle, WRINKLE GUARD
to ON. The other Auto Dry Cycles will retain the WRINKLE
setting. For example, if you select WRINKLE
in the Normal cycle, WRINKLE GUARD
the next time you select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD
after cool down.
helps smooth out wrinkles that form when
to get up to 2¹⁄₂ hours of heat-free,
at any time by pressing WRINKLE
, the dryer stops
will be on