Table of Contents
Advertisement
Removal and replacement procedures
Mass storage device
✎
The mass storage device spare part kit includes a left and right bracket, Mylar sleeve, connector, and 4 isolators.
Description
Hard drive:
■ 500-GB, 7200-rpm
■ 500-GB, 5400-rpm
■ 320-GB, 7200-rpm
■ 320-GB, 5400-rpm
■ 250-GB, 7200-rpm
■ 250-GB, 5400-rpm
Solid-state drive:
■ 256-GB
■ 128-GB
Mass Storage Device Hardware Kit (includes left and right brackets, Mylar sleeve, connector,
and 4 isolators)
Before removing the mass storage devices, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
4–10
"Battery" on page
4-7).
Spare part number
577607-001
501911-001
507553-001
503485-001
507552-001
503484-001
577609-001
577608-001
483862-001
Maintenance and Service Guide
Advertisement
Table of Contents
