Fitting other guards and cutting
attachments
•
Fit the correct trimmer guard (A) for use with the trimmer
head.
Hook the trimmer guard/combination guard onto the fitting
on the shaft and secure with the bolt (L).
A
•
Fit the drive disc (B) on the output shaft.
•
Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
•
Insert the locking pin (C) in the hole to lock the shaft.
A
B
C
•
Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
H
•
To dismantle, follow the instructions in the reverse order.
ASSEMBLY
H
– 13
English