Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer VM-100YC away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview The VM-100YC is a high quality 1:10 s-Video Distribution Amplifier for s-Video (Y/C) signals. It accepts one input, provides correct buffering and isolation, and distributes the signal to 10 identical outputs using 4-pin connectors. The looping connector can be used to connect to a local display or other Y/C acceptor, or to create larger systems (for example, connecting three VM-100YC units to make a 1:30 s-Video Distribution Amplifier).
Page 8
For looping (if required) to increase the number of outputs TERM Button Pushing in selects 75 ; releasing selects Hi-Z (for looping select Hi-Z) OUT 4-pin Connector Connects to the s-Video acceptors (from 1 to 10) 12 VDC +12V DC connector for powering the unit VM-100YC - Overview...
VM-100YC. After connecting your VM-100YC, connect its power and then switch on the power to each device. To connect the VM-100YC as illustrated in the example in Figure 1. Connect the s-Video source (for example, an s-Video player) to the INPUT 4-pin connector.
10% to 90%, RHL non-condensing DIMENSIONS: 21.5cm x 16.2cm x 4.4cm (8.45" x 6.4" x 1.7") W, D, H WEIGHT: 0.93kg (2lbs) approx. ACCESSORIES: Power supply OPTIONS: RK-1 19" rack adapter Specifications are subject to change without notice at http://www.kramerelectronics.com VM-100YC - Technical Specifications...
Page 13
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the VM-100YC and is the answer not in the manual?
Questions and answers