Default Mode - GE RAK147P1 Owner's Manual And Installation Instructions

Using your thermostat.
Temperature Scale Selection
Figure 3: Default Display after Reset and Initial Power-Up

Default Mode

Figure 4: Example Display
Figure 5: Example of Celsius Mode and Cooling System
4
The temperature scale can be selected by the C/F dip switch
inside the unit. Please refer to Figure 3 in the Installation
Instructions for identification of the correct switch.
If C/F switch is set at "F," the temperature scale after reset is
Fahrenheit. If C/F switch is set at "C," the temperature scale
after reset is Celsius.
Figure 3 shows the LCD right after reset. Fahrenheit scale is the
default.
The LCD shows the time, day of week, room temperature,
operating program number or hold status, and the system and
fan status.
For the example at left:
The time is 2:05 PM Wednesday.
The room temperature is 73°F. If the Celsius scale is selected,
the C indicator will be displayed.
The current operating program is DAY . If the indicator is
flashing, temporary hold is active.
Icon explanation:
If heating is selected: FLAME icon will be displayed.
If a call for heating is made: FLAME icon will be flashing.
If cooling is selected: SNOWFLAKE icon will be displayed.
If a call for cooling is made: SNOWFLAKE icon will be
flashing.
If Auto-changeover is selected and system is in heating
mode:
AUTO and FLAME icons will be displayed.
If heating is called while in AUTO mode: FLAME icon will
flash.
If Auto-changeover is selected and system is in cooling
mode:
AUTO and SNOWFLAKE icons will be displayed.
If cooling is called while in AUTO mode: SNOWFLAKE icon
will flash.
All icons will be off if OFF is selected.
Fan is in ON mode.