Figure 77 Sensor calibration / setup parameters - Page 3
SENSOR CALIBRATION/SETUP (page 3 of 3)
S623
S624
S625
S626
S627
S628
S629
S630
S631
S632
S633
Freecool Sensor PTC or NTC—This parameter currently only supports the NTC selection.
Freecool Sensor—This parameter adjusts the freecool temperature reading from the actual sensor
to compensate for any error of the sensor or to match other sensors in the room.
Calibrated Freecool Sensor—This parameter shows the adjusted temperature value of the freecool
sensor. This value is the actual sensor reading (+ or -) the offset "Freecool Sensor".
Supply Sensor—This parameter adjusts the supply temperature reading from the actual sensor to
compensate for any error of the sensor or to match other sensors in the room.
Calibrated Supply Sensor—This parameter shows the adjusted temperature value of the supply
sensor. This value is the actual sensor reading (+ or -) the offset "Supply Sensor".
Figure 78 System / network setup parameters—large display only System - Page 1
SYSTEM/NETWORK SETUP (pg 1 of 2)
S801
S802
S803
S804
S805
S806
S807
S808
S809
S810
S811
Number of Connected Units—This parameter sets the number of units that will be viewable from
the large display and will participate on the unit to unit network.
Teamwork Mode—This parameter selects which teamwork mode to use within a selected group.
Teamwork modes are described in section 4.0 of this manual.
PASSWORD (Actual Level 3)
Freecool Sensor PTC or NTC
Freecool Sensor
Calibrated Freecool Sensor
Supply Sensor PTC or NTC
Supply Sensor
Calibrated Supply Sensor
Optional Sensor C 1
Calibrated Optional Sensor C 1
Optional Sensor C 2
Calibrated Optional Sensor C 2
for next/previous unit
then
to change parameter
PASSWORD (Actual Level 3)
Number of Connected Units
Teamwork Mode
Configuration Safe
Network Safe
SW Version
for next/previous unit
then
to change parameter
UNIT 01
to select parameter
to confirm
SYSTEM
OK
OK
PAB 1.04.010 .T14
to select parameter
to confirm
86
Service Menu Parameters
????
NTC
+0°F
°F
NTC
+0.0°F
51.2°F
+0°F
°F
+0.0°F
°F
????
1
No
No
No
Need help?
Do you have a question about the Liebert Challenger 3000 and is the answer not in the manual?
Questions and answers