Makita 4013D Instruction Manual page 5

Switch action
A
CAUTION:
Always be sure that the dust bag or paper filter is
installed properly in the cleaner before use. Improper
installation may allow dust to enter the motor, resulting in
malfunction of the cleaner.
Always switch off the cleaner after each use to prevent
damage to the cleaner and to lengthen the service life of
the batteries.
1. Switch lever
ASSEMBLY
To start the cleaner, slide the switch lever forward to the "I"
position.
To
stop the cleaner, slide the switch lever back to the
" 0
position.
A
CAUTION:
Always be sure that the cleaner is switched off and the
battery cartridge is removed before carrying out any
work on the cleaner.
Dust disposal
A
CAUTION:
Empty the cleaner before it becomes too full, or the
suction force weakens.
Depress the buttons and open the front cover.
5