HP 700 Series User Manual page 105

Tapping on New in the Dialing Location tab does not start a
setup wizard. When you click on New, only the Prefix for
calling values change.
You can also create connections to your ISP or network by
configuring the necessary programs manually. Before you can
dial up, you will need to:
• If your HP Jornada does not have a built-in modem or you do
not want to use the built-in modem, install and configure a PC
*
Card modem . Follow the instructions provided by your
modem manufacturer.
• Establish an account with an Internet Service Provider (ISP)
or your corporate network administrator (for remote access to
your corporate network). Note the same information that is
presented in the previous sections in this chapter.
• Set up a Remote Networking connection.
• Set dialing patterns and dialing locations.
• Set up an e-mail service in Inbox and/or a Web service in
Internet Explorer. For more information, see the Using Inbox
and Browsing the Web or your intranet with MS
Internet Explorer for H/PC sections later in this chapter.
• Connect your HP Jornada to a telephone line.
To set up a Remote Networking connection
1. Use either the HP Jornada built-in modem (on models with
built-in modem), or install a PC Card modem.
2. Get the following information from your service provider (ISP
or network administrator): dial-up access telephone number,
user name, password, and domain name.
3. On the Start menu, point to Programs, point to
Communication, and then tap Remote Networking.
Modem purchased separately. Some Web sites/content may not be
*
available.
Chapter 6 | Accessing e-mail | 101