Select Service Or Application - HP StorageWorks P4000 User Manual

4. Select File Server from the list and then click Next.
Figure 18 Select Service or Application
.
5. Follow the instructions in the wizard to specify the following details:
• A name for the clustered file server
• The storage volume or volumes that the clustered file server should use
NOTE:
The clustered file server name is the name of the server that users should use to access their
file content.
6. On the Summary page, review the configuration details and then click Finish.
7. In the console tree, make sure Services and Applications is expanded, and then select the clustered
file server that you just created.
8. Under Actions, click Add a shared folder
The Provision a Shared Folder Wizard appears. This is the same wizard that you would use to
provision a share on a nonclustered file server.
9. Follow the instructions in the wizard to specify the following settings for the shared folder:
• Path and name
• NTFS permissions (optional)
• Advanced settings for the SMB protocol (optional)
• Whether the NFS protocol will be used for support of UNIX-based clients (optional)
10. After completing the wizard, confirm that the clustered file server comes online.
34 Cluster configuration