System Set-Up; Set Up Mode; Setup Screen (First); Brightness - Honda 2008 Pilot Navigation System Navigation Manual

Main Menu

System Set-up

Set up Mode

The Setup function consists of two
different screens that allow you to
change and update information in the
system. To display the Setup screens,
use the voice control system and say
"Setup," or press the INFO button and
select Setup. To change it to another
Setup screen, say or select More in the
upper right corner of the screen.
On any of the Setup screens, you can
use the voice control system to select
any item on the screen.
NOTE:
• If some items appear to be grayed
out, and cannot be selected, it is
because you did not select OK on the
initial Disclaimer screen. See
System Start-up on page 16.
• For information on the available
voice commands, see Voice
Command Index on page 125.
72 Navigation System

Setup Screen (first)

From any screen, say "Setup" or select
Setup from the Information screen,
and the following screen appears:

Brightness

The screen brightness has 11 settings.
To change the brightness, use the voice
control system and say "Brightness up"
or "Brightness down." You can also
select the Bright. bar and move the
cursor by pushing the joystick left or
right, or by touching the arrowhead in
the bar.
Tip:
If you are having trouble viewing the
screen in bright lighting conditions, try
increasing the brightness.
2008 Pilot
NOTE:
You can have a separate daytime and
nighttime setting for brightness. Adjust
each setting when the display is in either
daytime or nighttime mode.

Volume

The navi voice volume is adjustable in
10 steps, and also can be turned off. To
adjust the volume, use the voice control
system and say "Volume up" or
"Volume down." You can also select the
Volume bar and move the cursor by
pushing the joystick left or right, or by
touching the arrowheads in the bar.
After adjusting the volume, you will
hear beeps at the new volume level. You
can also select volume off.
NOTE:
If you turn the volume off, you will not
hear route guidance or voice command
confirmations.