Driving Position Memory System - Acura 2008 MDX Owner's Manual

Main Menu
Your vehicle has a memory feature
for the steering wheel, driver's seat,
and outside mirror positions.
Seat, except for power lumbar,
steering wheel and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2). For more information see
page 139 .
Table Of Contents
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page
Adjust the steering wheel to a
comfortable position (see page
124 ).
Adjust the outside mirrors for best
visibility (see page

Driving Position Memory System

140
).
155 ).
2008 MDX
MEMORY BUTTONS
MEMO BUTTON
3. Press and release the MEMO
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current positions of the driver's
seat, steering wheel, and outside
mirrors are now stored.
CONTINUED
157