Showing The Map Of Continental Usa; By Today's Destinations - Acura 2008 RL Navigation System Navigation Manual

Main Menu
Showing the Map of Continental
USA
With the Continental USA selection,
the display changes to:
Use the Interface Dial to move the
cross hairs to the area of the country
close to your intended destination. Then
push in on the Interface Dial. The map
scale changes to display a closer view of
the area you selected.
If desired, rotate the Interface Dial
knob to change the map scale. When
you have the cross hairs on the desired
icon, map feature, or road, push in on
the Interface Dial. The address of the
location you have selected will appear at
the top of the screen.
The yellow box indicates the area you
will see when you click on the current
map with the Interface Dial.
NOTE:
The address of the location will be
displayed on the 1/20, 1/8, 1/4, or 1/2
mile (80, 200, 400, or 800 meter) scale
map.
If this is the desired address, push in on
the Interface Dial again. If not, use the
Interface Dial to reposition the cross
hairs, then push in on the Interface
Dial again to display the new address.
Once you select an address, the system
then displays the Calculate route to
screen (see Driving to Your Destination
on page 50).
2008 RL
Entering a Destination

By Today's Destinations

You can create a "trip" by combining
multiple destinations previously
selected on the Calculate route to
screen.
Select Today's Destinations from
the Enter destination by screen and the
display changes to:
NOTE:
If Today's Destinations is grayed
out, there is no Today's Destination
entered.
Navigation System 47