Changing Your Destination; Find Nearest (Voice Command); Go Home (Voice Command); Using Interface Dial To Change Destination - Acura 2008 RDX Navigation Manual

Main Menu
Driving to Your Destination

Changing Your Destination

There are four methods by which you
can change or add a waypoint to your
route. These are:

Find Nearest (Voice command)

From the map screen, say one of the
"Find Nearest..." voice commands to
locate the nearest gas station, ATM,
restaurant or other point of interest. See
the "Find Nearest" voice commands
listing on page 145.

Go Home (Voice command)

From the map screen, say "Go home."
If you have entered a "Go home"
address, then the system will display a
confirmation screen.
72 Navigation System
Using Interface Dial to Change
Destination
While following a calculated route, you
can select a new destination with the
map screen and the Interface Dial.
With the map screen displayed, use the
Interface Dial to move the position
icon. It will change to cross hairs. Use
the Interface Dial to position the cross
hairs on your desired new destination,
street, or icon, then push in on the
Interface Dial. The address within the
cross hairs will be displayed. If this is
not your desired new destination,
reposition the cross hairs with the
Interface Dial, then push in on the
Interface Dial again to see the new
address.
2008 RDX
When you push in on the Interface
Dial on a new destination, you will see a
pop-up menu as well as the address
display. You can say or select either Set
as Dest., or Set as Waypoint on the
pop-up menu. The system will return to
the map screen, and recalculate the
route to your new destination or
waypoint.
NOTE:
When you scroll the map screen while
on route to a destination, some voice
controls will not function. These
include:
• Display "Heading up"
• Display "North up"