Honda FRC800 Owner's Manual page 25

Forward Gear Selection
Return the throttle lever to the slowest position.
1.
Release the clutch lever to disengage the clutch.
2.
Move the shift lever to the desired gear position.
3.
The tines will only operate when the shift lever is positioned in the
yellow zone.
If the shift lever will not engage the desired gear, squeeze the clutch
lever and move the tiller slightly to reposition the gears.
NEUTRAL POSITION
Gear Selection Table (Throttle in FAST position)
Gear position Tiller speed
1
2
3
TINE/WHEELS
ENGAGE 1
TINE/WHEELS
ENGAGE 2
R
Tiller speed applies when standard tires are used.
Tine speed
0.4 mph
0.9 mph
2.9 mph
219 rpm
0.4 mph
OPERATION
GEARSHIFT LEVER
Suitable work
Moving tiller, loading tiller onto a
truck, taking tiller on or off field
Moving tiller, loading tiller onto a
truck, taking tiller on or off field
Moving tiller
Tilling, ground breaking, weeding
Tilling, ground breaking, weeding
Moving tiller, loading/unloading
tiller from a truck, taking tiller on or
off field
23