Advertisement
jacksonofthe the DVD+VCR to the left/right in jacks TV (A2) the supplied Rear of TV S-VIDEO INPUT COMPONENT VIDEO INPUT AUDIO INPUT Pr Pb
Y R L Note If you use this connection, set the TV's source selector to VIDEO. Rear of TV ANTENNA INPUT AUDIO INPUT VIDEO INPUT S C A2 L R R A1
V Rear of DVD+VCR Rear of DVD+VCR 12 Connections (Continued) Optional, Preferred TV Connections Note You can ONLY listen to DVD playback
using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack.
) Rear of DVD+VCR Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1,
A2) supplied. A1 A2 X Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-
channel decoder (Dolby DigitalTM, MPEG 2, or DTS) L R COAXIAL DIGITAL INPUT AUDIO INPUT Amplifier (Receiver) 1 2 Connect one of the
DVD+VCR's DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (coaxial X) audio cable. You
Accessory Audio/Video (A/V) Connections to DVD+VCR Connect the VHS IN LINE 1 or AV INPUT jacks on the DVD+VCR to the audio/video out jacks on
your accessory component, using the optional audio/video cables. Accessory Component: VCR, Camcorder, Video Camera, Satellite Receiver, Laser Disc
Player Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video
receiver that supports one or more of the audio formats supported by your DVD+VCR (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the
logos on the front of the receiver. Caution: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is
Notes If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound
at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. To
see the audio format of the current DVD in the onscreen display, press AUDIO. Rear of DVD+VCR Jack panel of Accessory AUDIO OUTPUT R L VIDEO
OUTPUT OR Front of DVD+VCR 13 PREPARATION Before Operation - VCR Part On-Screen Display (OSD) Some of these functions will be displayed
every time the VCR is operated. PLAY SP EASY INFORMATION If the Extended Data Service (XDS) signals are provided along with normal TV signal in
your area or during playback of a tape recorded with Extended Data Service (XDS) signals, the station ID, program title and program details are shown in
the TV screen. When viewing a channel with Extended Data Service (XDS) signals, press SELECT/ENTER then the station ID will appear on the TV screen.
Press SELECT/ENTER again and the program details will appear on the TV screen. When viewing a tape recorded with Extended Data Service (XDS)
signals, press SELECT/ENTER twice then the program title and program details will appear on the TV screen. PROGRAM DETAILS LENGTH: Indicates the
RATING: Indicates the rating of the current program (N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings
are not applicable to this program. SP CH 4 WABC STEREO PROGRAM DETAILS "Home video" LENGTH 01:00 TIME REMAINING 00:26 RATING N/A
HI-FI CH 4 STEREO JUL 5 , SAT 2:15 PM TAPE SPEED DISPLAY Shows the current tape speed.
will need to activate the DVD+VCR's digital output. (See Digital Audio Output on page 19).
run length of a program. TIME REMAINING: Indicates the remaining time of a program.
You're reading an excerpt. Click here to read official SANYO
DVC-2600 user guide
http://somemanuals.com/dref/81636
(See page 12.
selected.
Advertisement
