Advertisement
25 You are now recording the program you see and hear on the TV. OPERATION Operation with tape (Continued) Tape Counter Memory Feature Real-
Time Counter Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display. Every press of CLK/CNT
changes the TV screen as illustrated below. Additional Information In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward
modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the
DVD+VCR will turn itself off. After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve
It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it. Be sure the DVD+VCR
Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the
DVD+VCR channel (3 or 4) and pressing the TV/VCR selector to turn the DVD+VCR's TV indicator off. Do not attempt to hook up more than one television
set to the DVD+VCR for either recording or playback. 2:15 AM CLOCK 0:05:25 COUNTER REM 1:07 REMAINING TIME Counter changes to "0:00:00"
The real-time counter does not operate if nothing is recorded on the tape. The real-time counter will not work unless a tape is inserted. Counter Memory
Function This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times. Auto
Play System This DVD+VCR features automatic playback. Load a cassette (with the safety tab removed).
The Output Source is changed to VCR mode automatically. The power turns on automatically and playback begins. At the end of the tape, the DVD+VCR
stops, then rewinds. The cassette is ejected after rewinding and turn itself off automatically. LOAD AUTO PLAY TAPE AUTO REWIND EJECT AUTO AUTO
POWER OFF 1 CLK/CNT repeatedly display the 2 Presscounter appears on thetoTV screen. realtime want locate 3 At the point that you"0:00:00" by later,
reset the real-time counter to pressing CLEAR. 4 Continue to play or record. x Press 5 ishes. STOP (x) when recording or playback fin. 6 Press BACKWARD
). when the tape counter The tape automatically stops returns to about "0:00:00". Tape Remaining This function allows the time of the remaining tape to be
displayed during recording or playback. Press CLK/CNT until the REM indicator displays on the TV screen during recording or playback. Note The
remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc)
Begin recording or playing a tape. 26 Operation with DVD Playing DVD Playback Setup DVD General Features Note Unless stated otherwise, all operations
described use the remote control. Some features may also be available on the Setup menu. Moving to another TITLE DVD 1/3 1 label 2 Load your chosen disc
inisthe tray, with thesure facing up. When a double-sided DVD inserted, make the side you want to play is facing down. Z Press OPEN/CLOSE (Z) to open the
When a disc has more than one title, you can move to another title as follows: Press DISPLAY when playback is stopped, then press the appropriate numbered
button (0-9) then press SELECT/ENTER to select a title number. Moving to another CHAPTER DVD 1/12 3 Z Press OPEN/CLOSE (Z) to close the tray.
"LOAd" appears in the display window, and playback starts automatically. If playback does not start, press PLAY (H). In some cases, the disc menu might
If a menu screen is displayed The menu screen may be displayed first after loading a DVD which contains a menu. DVD Use b/B/v/V buttons to select the
to protect it from dust.
when the cassette is ejected.
title/chapter you want to view, then press SELECT/ENTER to start playback.
You're reading an excerpt. Click here to read official SANYO
DVC-2600 user guide
http://somemanuals.com/dref/81636
(.
disc tray.
appear instead.
Advertisement
