Connecting To The Water Supply Line - Samsung Refrigerator User Manual

Parts for water line Installation
Water line fi xer and screws
Water line

Connecting to the water supply line

1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3. Follow the Water line Installation Instructions in
the installation kit.
CAUTION
The water line must be connected to
the cold water pipe. If it is connected
to the hot water pipe, it may cause the
purifi er to malfunction.
Close Main Close Main
Water pipe Water pipe
Close Main Close Main
Water pipe Water pipe
4. After connecting the water supply to the water
fi lter, turn your main water supply back on
and dispense about 3L to clear and prime the
water fi lter.
DA68-02916A (EN)-07.indd 21 DA68-02916A (EN)-07.indd 21
Connecting the water line to the
refrigerator
1. Remove the cap from the water line on the unit
2. Connect the water line on the unit with the
Pipe connector
3. Tighten the compression nut onto the
4. Turn water on and check for any leakage.
• Samsung Warranty does not cover
No gap No gap
• It will be done at
• Please contact Plumber or Authorized Installer
• If Water leakage occurs due to improper
and insert the compression nut of the water
line into the water line on the unit.
water line in the kit .
compression fi tting. There should be no gaps
between (A, B & C )
Only connect the water line to a drinkable
water source. If you have to repair or
disassemble the water line, cut off 6.5mm
of the plastic tubing to make sure you get
a snug, leak-free connection.
Remove Remove
Loosen a Loosen a
cap cap
Water Line Water Line
from unit from unit
Water Line Water Line
from Kit from Kit
Before being used, the leakage in these
places should be examined.
CAUTION
WATER LINE
INSTALLATION.
customer's charge
unless the retail
price includes
installation cost.
for the installation if needed.
installation, Please contact installer.
No gap No gap
setting up _21
2014. 5. 19. 2014. 5. 19. 2:06 2:06