Advertisement
Quick Links
Advertisement
Related Manuals for HP 3COM Etherlink III 3C590 PCI 10BT
Summary of Contents for HP 3COM Etherlink III 3C590 PCI 10BT
- Page 1 3COM Etherlink III 3C590 PCI 10BT Network Adapter Installation Guide...
- Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 General information to read before installing General information to read before installing On all systems : efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
- Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
- Page 5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
- Page 6 1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
- Page 7 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
- Page 8 2 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the appropriate spaces and click on “Close” (Contact your network administrator if you do not have the required information).
- Page 9 Connecting to a Netware Requirements 3.12 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
- Page 10 3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
- Page 11 Connecting to a Netware Requirements 4.11 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22. • Microsoft Windows 95 SR2.5 media.
- Page 12 4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
- Page 13 Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
- Page 14 5 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM 3C590 driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
- Page 15 Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
- Page 16 6 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)” and click on “OK”.
- Page 17 Requirements NetWare 3.12 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
- Page 18 7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
- Page 19 7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft Power Down application once the...
- Page 20 Requirements NetWare 4.11 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
- Page 21 8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
- Page 22 8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft Power Down application once the...
- Page 23 Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
- Page 24 9 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
- Page 25 Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
- Page 26 10 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
- Page 27 Connecting to a Novell Requirements NetWare 4.11 Server • HP Vectra with Windows NT3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
- Page 28 11 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
- Page 29 Requirements Windows NT 4.0 Server • HP Vectra with MS-DOS and MS-Windows for Workgroups 3.11 • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.386, version 1.18 • Microsoft Windows for Workgroups 3.11 media.
- Page 30 12 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Select “3COM Fast EtherLink/EtherLink III Bus Master Adapter (3C59X)” in the “Unlisted or Updated Network Adapter” dialog box, and click “OK”. 10 Make sure that the “3COM Fast EtherLink/EtherLink III Bus Master Adapter (3C59X)”...
- Page 31 Requirements NetWare 4.11 Server • HP Vectra with DOS and MS-Windows for Workgroups 3.11. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.386, version 1.18 • Microsoft Windows for Workgroups 3.11 media.
- Page 32 13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Accept the default network board settings and press “F10” to save it. 10 Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation.