Bluetooth Module - HP PROBOOK 4520S Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 599807-001. See
for more Cable Kit spare part number information.
Description
HP Integrated Bluetooth 2.1 module for use in all countries and regions except Japan and Asia
Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the switch cover and keyboard (see
6.
Remove the optical drive (see
7.
Remove the power button board cable (see
8.
Remove the speakers (see
9.
Remove the thermal shield (see
10.
Remove the display assembly (see
on page 89
11.
Remove the palm rest (see
12.
Remove the hard drive (see
13.
Remove the top cover (see
Remove the Bluetooth module:
1.
Position the computer right-side up with the front toward you.
2. Disconnect the Bluetooth cable (1) from the system board and from the antenna (2).
Battery on page
Optical drive on page
Speakers on page
Thermal shield on page
Display assembly on computers with 17.3-in displays
or Display assembly on computers with 15.6-in displays on page
Palm rest on page
Hard drive on page
Top cover on page
55).
Switch cover and keyboard on page
61).
Power button board on page
65).
67).
84).
87).
103).
Component replacement procedures 109
Cable Kits on page 33
Spare part number
537921-001
56).
63).
96).